INSPECTION AND INSTALLATION CERTIFICATE, WORK PROCEDURES, SPECIFIC PSS, RISK ASSESSMENTS.
SWTH engineering has a technical department composed of a multidisciplinary team specialized in works at height, which will provide you with a specific, transparent and efficient treatment.
SERVICES
Work at height is work that is carried out at a height greater than 2m. To carry out this type of work, such as, for example, landing on a deck from a Personnel Lift Platform, it is necessary to draw up a specific work procedure. In addition, it is necessary to carry out specific Risk Assessments when work is carried out in special conditions or situations.
When installing anchorage systems such as Horizontal Anchor Lines EN 795 C or Vertical 353-1/2, as well as Anchor Points EN 795-A it is an indispensable requirement to issue an installation certificate describing and certifying the perfect condition of the installed system. This type of certificate will also be issued after the review of a PPE.
SWTH engineering provides the services described above and listed below:
Health and Safety Plans
Specific Risk Assessments
Safe work procedures for working at heights
Has a Workplace Risk Assessment been performed?
Do you have the right equipment for your job?
