Anchor point for AOS01 brackets

The use of an anchor point or lifeline is essential for safety when working at height. Your PPE would choose AOS01.

AOS01 is the ideal solution to complete the supports of the Rothoblaas range.

It can be installed on TOWER, TRAPO, SHIELD, SHIELD 2.0, SEAMO, COPPO, BLOCKand SIANK FOUR.

These brackets for anchor points are suitable for installation on wood, concrete and sheet metal structures, as well as on green roofs and non-perforated flat roofs.

Made entirely of stainless steel, AOS01 is resistant to corrosion and atmospheric agents, maintaining its effectiveness over time.

Grease, bolts and washers for installation are included in the scope of supply.

KNOW THE ANCHORING DEVICES

To prevent fall hazards when working at heights, anchorage devices are used both in new constructions of any type of use and in existing buildings during roof renovation work.

These devices must meet the requirements of standard EN 795 “Personal fall protection equipment.

Anchoring devices”, by the EN standards contained therein and subsequent updates.

There are several types of anchoring devices:

• TYPE A – Anchorage device with one or more anchorage points and mandatory attachment to the structure;
• TYPE B – Anchorage devices with one or more anchorage points and without mandatory attachment to the structure;
• TYPE C – Anchorage device using a flexible line that deviates from the horizontal by no more than 15º;
• TYPE D – Anchorage device using a rigid line that deviates from the horizontal by no more than 15º;
• TYPE E – Anchoring device for use on surfaces that deviate up to 5º from the horizontal, where performance is based exclusively on the mass and friction between the device itself and the surface.

Download documentation

AOS01