The WING anchor point ROTHOBLAAS is developed as a stainless steel anchor point designed for work at height and suspended work.
Being designed in accordance with:
-
- EN 795:2012 A
- CEN/TS 16415:2013
- UNI 11578:2015 A
- ANSI Z359.18/A.
GEOMETRY
Its dimensions are 115 mm wide and 56 mm high with a thickness of 14 mm and two cavities, one of 17 mm in diameter to receive the screws and the other of 37.5 mm in diameter to house the operator’s fastening system.
VERSATILITY
Robust in appearance and reliable in use, the WING anchor point is versatile and can be used both for work in suspension, allowing 1 user, as well as for protection against falls from heights, allowing 3 users.
POLIVALENT
Versatile in use, it is available in 3 different versions, two materials and three colors, always finding the exact anchor point for each application and environmental condition.
Below is a sketch of the different inclinations that the WING anchor point allows. Being these:
- m<5º for flat surfaces.
- 5º<m<=90º inclined surfaces.
- m=90º vertical position.
- Stitch above the head (in suspension).
The WING suspension and work-at-height anchor point is suitable for mounting on wood, concrete and steel substrates.The following video shows step by step how to install the dot on each of the above mentioned substrates.
WOOD SUBSTRATE
CONCRETE SUBSTRATE
STEEL SUBSTRATE
For more information do not hesitate to contact us.
