VAT Inc. Without VAT

Sales, promotions and offers in Work and Work Clothes

Protección en altura

Eventos Deportivos Escalada rutas kayak

Petzl PROGRESS ADJUST-I lanyard 2m (L044BA01) - Lanyards & energy absorbers - PETZL - 1
  • Petzl PROGRESS ADJUST-I lanyard 2m (L044BA01) - Lanyards & energy absorbers - PETZL - 1
  • Petzl PROGRESS ADJUST-I lanyard 2m (L044BA01) - Lanyards & energy absorbers - PETZL - 2

Petzl PROGRESS ADJUST-I lanyard 2m (L044BA01)

€47.25 VAT Inc. €47.25 Without VAT

Adjustable positioning lanyard.

Shipping from 3 to 8 business days, FREE from €85 (VAT Inc.)

Description of the product "Progress Adjust I 2 m"

Simple and adjustable Progress Adjust I 2m lanyard by Petzl for progression and positioning.

Includes the Adjust lock, which allows you to adjust the length of the rope very quickly, easily and precisely, since it is unlocked with a simple tilt and is handled very well thanks to its ergonomic shape.

It can be used in two ways:

  • In simple with the Adjust clamp positioned at the ventral attachment point of the harness, when the anchorage is located above the user, so that the load is distributed between the waist and thighs for more comfort.
  • Double on the side attachment points of the harness. This type of connection guarantees a better distribution of the load on the harness belt.

Progression lanyards do not have an energy absorber. Therefore, they should only be used if the fall factor is less than 1 (use below the Ascension locking fist or anchor point).


  • Includes the Adjust blocker to adjust the length of the adjustable rope.
  • Includes Captiv Adjust clamping bar that allows the Adjust rope clamp to be kept in the correct position and to secure the mooring element and the rope clamp to the connector
  • Protective sheath that protects the rope from aggressive contact points, while favoring its sliding. This protection is removable, which allows you to climb as close as possible to the anchorage when the lanyard is used single.
  • Includes Stuart that allows to keep the connector in the correct position when the rope clamp is placed on the ventral attachment point of the harness.
  • Composed of dynamic rope to limit the force transmitted to the user in the event of a short fall.
  • It must be used with an automatic safety locking carabiner (not included).
  • Compatible with OK, Am'D, Bm'D and OXAN connectors.
  • Manufacture materials: aluminium, polyamide, polyester, high tenacity polyethylene (PEHD) and elastomer.
  • Adjustable cord length up to 200 cm.
  • Approximate weight 185 g.
  • Guarantee: 3 years.
  • Certifications: CE EN 358, EN 795 B, EAC, ANSI Z359.3, CSA Z259.11.

References L044BA01
Length 2 m
Weight 300g
Warranty 3 Years
Pack 1

Data sheet

EN358 Positioning

You might also like

8 other products in the same category: